Power and speaker harnesses for Android and universal head units. Built from your unit's pin definition, delivered ready to plug in and install.
Send the pin definition of your head unit — or photos of the connectors and a sketch of the branches — and we map every circuit: power, speakers, illumination, key control, reverse trigger and amplifier remote. The harness arrives labeled and bundled so your installer follows your manual, not guesswork.
Typical values for this line, based on what we run in production. Yours may differ. Every number is confirmed at quotation and held to the approved sample.
| Wire gauge | 22–14 AWG by circuit load; copper or CCA, confirmed at quotation |
|---|---|
| Insulation | PVC or cross-linked, rated -40°C to 105°C; silicone to 125°C on request |
| Connector | 10-pin, 16-pin and other common power/speaker plugs, keyed and polarized |
| Circuits | ACC, B+, GND, ILLUM, 4× speaker, reverse, brake, antenna, KEY1/KEY2, amp remote |
| Finish | Corrugated conduit, taping, sleeving; branch labels to your scheme |
| Packing | Polybag, header card or bulk export carton |
| Operating temperature | -25 °C to +80 °C standard; +105 °C variant available |
| Storage temperature | -20 °C to +60 °C |
| Withstand voltage | 300 V DC |
Copper or CCA, 22–14 AWG per circuit, PVC / cross-linked / silicone insulation.
Pin count, keying and polarity matched to your unit; designated part numbers welcome.
Any length from 10 cm; branch layout per your installation manual.
In-house overmolding; housing shape and color matched to your brand.
Branch labels, channel numbering and bundle print to your scheme.
Retail polybag with header card, or bulk export carton.
Send your drawing, sample photo or BOM — we reply with feasibility and pricing within one business day.
Request a Quote
