Wire Harness · Companion Cable · CAN Power Cable

CAN Power Cable

One 60 cm split cable runs on both our TPMS receiver and our axle-temperature controller. One part number instead of two, one supplier instead of two — and the wiring has been proven on real equipment rather than on a bench.

One cable, two devices: receiver and axle-temperature controller share the same cable
Read from the printing: AWM-recognized wire, 300 V, 80 °C, FT1, 22 AWG 2-core
Split configuration: 2-pin terminal, sealed connector and rubber grommet
Built to your spec: connector brand, part number and length to your system
Cable only, stated plainly: ships with modules that carry an FCC ID — we supply the cable, not the system

Request a Quote How We Customize

6-pin sealed connector and split terminals on the CAN power cable

Sealed connectors and fuse holder on the CAN power cable

Specification Status

Confirmed vs. To Confirm — No Guessing in Between

This page states only what the cable itself proves. The rest we confirm with you at quotation.

Confirmed — read from the cable printing

Wire: AWM recognized, 300 V, 80 °C, FT1
Core: 2 cores / 17 strands → 22 AWG (0.33 mm²)
Overall length: 60 cm, split configuration

To confirm — tell us, we do not guess

Pin assignment of the 6-way connector. CAN needs two signal wires; the other four carry power, ground or other signals. We need the per-pin function to match your receiver.
Twisted pair and shielding. If the cable carries CAN data, twist and screen construction decide whether the signal is stable at speed.
What the 60 cm measures. Terminal to connector, or fully unwrapped including the branch? The two differ by a whole branch.
Jacket material, diameter, oil and abrasion resistance.
Yellow terminal: pin count, termination type and wire range.
Mating test: whether the connector mates reliably with the probe you use.

Scope, stated plainly: we build the cable. If you need the complete receiver, sensors or the fleet platform, that runs through a separate supply agreement.

Customization Options

Specifiable on This Cable

Connector spec

Brand, part number, pin count and gender per your receiver.

Length & split

Overall and branch lengths to your routing.

Wire & cores

Gauge and core count confirmed against the load.

Twist & shield

Twisted pair and shielding where CAN data must stay stable.

Labels

Part numbers and routing labels to your scheme.

Packing

Bulk export carton or per-device bag.

CAN Power Cable